Q: I just installed this motherboard in a case with an AMD XP 1800, food and 512K GDR 2100 from another system that works great and I can not boot. If I jumper the CPU at 133 I have no video and the system is turned off in about 5 seconds. If I move that jumper to 100MHz will allow me to go to the setup program and then shut down after about thirty seconds. If I skip the setup will boot until I post me there is an O / S problem. The hard drive is a WD 60 G, which was cloned from the Dell computer is replaced. Would there be a problem with the fact that the old MB and an Intel chipset had a new chipset uses the Nforce? Ive tried using only one stick of DDR and swappinp slots without any changes and nothing seems to get hot and all fans are running ok. There are no PCI cards installed as this board has everything onboard. Everyone wants a shot to take on this problem?
Second Chance Romance – How To Win Your Ex Back
Re:Everything is working good now that I copied the hard drive a second time . The system seems to be very stable with this motherboard. I have had problems with all three hard drives that I copied this week, they all had to be done twice with Data lifeguard. Maybe it's an issue with the software I used.
Xp Windows Cleaner (Clean Up Microsoft Windows
Re:Thanks for the props
Xp Repair Pro 4.0 – New Software / Now 75% Commission
Re:guy, I wish I had your photo guide when I built my computer recently. The hardest part was the heatsink installation on Athlon XP CPU on Albatron KX600 Pro mobo.
The Road To The Second Million
Re:When I recently changed the mobo (from dual pIII S2507 Tiger 230 to a single Athlon XP Albatron KX600) and memory, I didn't have to reinstall Windows XP pro. I used the same HD that I used before and all I had to do was "activate" Windows XP and MS Office XP. (Windows XP detected that my system configuration changed and told me to activate the OS.) That's all. Everything is working as before…normal.
Crazy Conversions – Second Chance Blueprint
Re:Sure thing
Is it behaving itself better now? We have a bunch of the A7N266-VM at work and I really like them, even if they're not the hot new thing. Very stable and reliable, and that counts for a lot in an office situation.Video Tutorial de Instalacion Windows Xp
Re:Thanks for the warm wecome. I was on this forum a few years ago and I forgot how good you guy's are at troubleshooting. guy, your photo/video guide to heatsink installation was a big help and I can't belive I had the heat sink on backwards but I did. I guess you are never too old to make a simple like that even after building about 50 computers before.
3 Seconds to Sell Your House
Re:Welcome to the Forums guy
Yes, Windows is gonna need a reinstallation with the new mobo.
When an A7N266-VM shuts itself down, it is usually because the CPU is signalling that it's in an overheated condition. Start with my little photo/video guide to heatsink installation (http://www.omnicast.net/~tmcfadden/guides/Heatsink/index.html) and see if you've got your heatsink correctly installed.
Second Life Riches Guide – Awesome Niche! – Be A Google Assassin
Re:I just puchased this board from Newegg and use it for my old AMD 1700 and it work out of the box. Not need to setup any jumpers. Make sure all the memory and the processor is sitted right. Also try a different power supply if you have an extra one laying around.
6 Second Self Defense System Video Course
Re:If the CPU is new did you remove the protective plastic from the
thermal pad on the heatsink? I ask because shutting down in 5
seconds is typical of not removing the plastic and the mobo protects
the CPU from overheating. If you do get it up and running
I would recommend a fresh install of the OS as well.
0 Comments.