Q: Hello.
When my WD drive back together after formatting a drive on the cable, the WD drive is completely white. I mean, you could go into My Tech Support “and click on the drive and see nothing, although said that 100 grams beeing used. There is no interference with the drive though. Everyone knows what to do? Please?
Re:Thanks for all the help everyone. The problem was caused by OCZ PC3500 EL memory, for some reason both sticks of this brand refuse to work with my Abit BE7-RAID.
Tried another stick of OCZ PC3500 non-EL and it worked fine. Emaild OCZ tech support, waiting for an answer.
Re:Got warranty? Swap the 2 components. [...]
Q: My computer is crashing a lot lately, by himself and I wanted to remove Windows 2000 and do a clean installation after formatting the C drive, but for some reason does not work the same way as in previous versions of Windows, where you could go to the MSDOS prompt and Just format thing. Anyone suggestions on how to get around this?
Q: I tried to build a HTPC in the coming months. I have a limited budget so it will give me a couple of all components needed to buy together. My question is if I go through now buy my internal hdd right for the HTPC, Is there a way I could connect my dell laptop E1505, so I can jump start to get on dumping an operating system, progs and movies on it? . . . and then just build the rest when I can the rest of the parts to come?
Q: I have a 7200 rpm IDE drive (Seagate Barracuda IV), with two partitions. The second partition (the last of the 20GB drive) is formatted FAT32.
I now have a GSA-4160B Goldstar DVD burner, and I write DVDs at 4x (sometimes 8x) 0.
The problem is: a short time after the writing , I want to start other programs, it takes a long time, and then the DVD buffer jumps down to 12% in some places, and the buffer used by the writing program depletes.
What would be the best wa
Q: I have a case with microphone and headphone jack at the front
the cable ear R, L ear, Mic GAN, Mic Dates and GND
5 plugs, the ECS sites just tangential to the Front Header pins
with the pins to as
MIC
GND
MIC-P
VCC
Fout -R
Fout-L
NC
RET-R
RET-L
anyone know which pin is which?
im thinking of the message to R / L Ear R / L, but the other three Im not sure
how much damage
Q: not updating Im different from a Windows update recently. I went by IE settings and they seem correct. My PC is upstairs OK. I compared all the settings but still can not see the problem. I am able to bring Thie site log in and click on one of the forums, but when I want to start a new message or to answer someones comment I click on the appropriate link and nothing happens. Anyone have any ideas? Thanks!
Re:Yeah, I was surprised about the repair as well. They claim to have repaired the northbridge controller last time around. The video card is an ASUS so thats why they asked me to send it along. I bought them both from Monarch Computers.
At least the board worked before I sent it to [...]
Q: Thanks for your help guys . I installed Windows XP and the problem solved automatically:) —————————
After numerous crashes, decided to clean the hard disk sweep on the IBM laptop, and then everything . I installed win98 (couldnt find my win2k installer), and now the screen is very small! Before the screen was the size of the entire LCD. Now it is just a small box in the center (about half the size of the screen) 0.
How can I fix this? Hel
Q: Hi, I just got my new Maxtor 40 Gig 7200 yesterday and was planning to copy everything from my old IBM 10gig hd to the new drive. some strange reason I can not get them working. First, I ran fdisk and created a partition, followed by a format. I then linked to IBM (which is the master) as slave. when the comp starts up, windows would not boot, that was missing himem.sys quote. VAT is divided into the old IBM May 2 gig drives. When I looked at the various stations, my old C: drive remained as