Q: I amusing W2K Server. I have 2, 3 com network cards. Is there a way to tie them all together and in my transit?
Virtual Private Server (vps) with Web Interface, for MetaTrader Forex
Re:btw this is called "adapter teaming" from what I know, certain nics support teaming up to four together.
This is called 'Etherchannel' by Cisco, 'Trunking' by Sun, 'Bonding' in Linux and I guess teaming in Windows.
Setting Up A Web Server.
Re:you need 200mb/s throughput?
bored?
Database Normalization EBook(R.
Re:3com adapters have teaming software and it really is easily done. I'm not sure if your 3com NICs are supported, but if you go to 3com's download site and see what's available for your adapter.
Eric
LiveBusinessRadio.com
Re:Only if the both the adapters you're using as well as your switch support it. Typically referred to as teaming, is also known as trunking, spanning, aggregation, or bonding. You'd need to check the specs on those 3com adapters you're using. I know that the Intel, HP, and Cisco support trunking with their adapters and switches, not too sure about 3com (though I imagine that they do).
Here's a few articles that touch on the basics.
http://www.ieee802.org/3/trunk_study/tutorial/pctrunk.pdf
http://www.cisco.com/warp/public/779/largeent/learn/technologies/fast_echannel.html
http://www.intel.com/support/express/switches/1gb/24434.htm
Wow PvP Domination Guide
Re:These are 2 identical 3 com 10/100 nics.
Freedom Lifestyle Income Program
Re:btw this is called "adapter teaming" from what I know, certain nics support teaming up to four together.
JK
Spamfilter xQmail.eu for a future without spam
Re:Buy a switch with a gigabit port and install a gigabit NIC into the server. Much easier to get working.
EZForexHost – Dedicated Forex Trading hosting made easy!
Re:Network Card bonding has to be done at both the switch and OS/Software level.
It is not something easy nor cheap to do.
Typical switches, routers you buy in stores can not handle such a configuration.
You have to identify your bottleneck before taking this route because if your going out to the internet then bonding 2 10/100 NIC to try and squeeze out more on your 1,2,3 Mbps Cable modem/DSL line isn't going to provide you anymore speed then you already have.
It will end up costing you money in the end
Tremendous Traffic – great Conversion Rate
Re:can't remember where i saw it but i belive you can . you configure them 1 for inbound 1 for outbound.
i'll see if i can locate whatever it was i read.
good luck
0 Comments.