Q: Well, it seems that the wireless adapter card setup correctly cause it detects my system and my neighbors and connects them because they do not encyrption WEP setup .
When I try to connect to me correct to ask for a key and I type it in when I set it up and NO GO! It does not mean that it is wrong it just never connects .
I have a WRT54G v2.2 router and a Linksys WMP54G PCI Adapter . well .
I set up the wirelss router on my main machine and followed their simple step by step setup . It seems since the work via the cable modem is working properly .
I tried to set it to mixed B and G, but the levy thing before I save settings will only say B . Im not sure you POS! So I finally just set my G-only and said, forget the laptop and the B-mode adapter . By the way I was never that, at work and it was 2 feet away . It stayed connected as a peer to peer, but woulnt let me use the internet .
It cannot be away for my neighbors to their lowest floor and away . So I should work .
Any guides to help me set this up? ?
It see but I can not access it. The first time I could open and said a strong signal, but I coulnt the net . Now its simply not even connect . but says not connected and their networks are available . Like I said, I chose my neighbors and it works as I type this .
Re:can you run netstumbler or something similar?? I'm wondering what else might be lurking in the neighborhood. And I would just get rid of the cordless phone and replace it with a 900mhz phone.
Re:Got it up and running afetr unplugging router and resetting it…..100% fine for the last 12 hours ……been file transfering a bunch and son is been on the net on and off at playhouse disney…seems to be fine….
Re:Everything was fine for an hour or so…I re-enabled WEP encryption by using the webpage…allseemed to work…I transferred some files…worked great…was playing a file of a shared directory and POW…It drops connection…
Next thing I know the laptop had no connection and the LAN connect line said limited or no connectivity…I try to reinitialize router and it errors out saying the router failed to assign an IP…I tried repair no go…I tried disconnecting the cable modem so it would reset the mac id and no go…Only way I could get internet to work was put the modem line back directly into the pC and forgo the router…
WTH…Are networks this unstable???
Re:OK upstairs one is working and all network file and printer sharing is working…
I though it was th ecordless but it was saying 68% signal strength which must be prety good for wireless….I had one 80xx auth checked and once I unchecked it the signal hols….
Now I want to enable the WEP….
Will I be safe behind the windws firewall and if it is the only PC with it installed??? I set up the network so the diagram said all pc go to hub then main pc before internet….Is this right???
Re:Kerio disabled and windwos firewalled enabled…
It works…I setit back to mixed mode though the f-ing program say B mode only and the laptop works flwalessly….
Upstairs works but wont hold signal lock….Is it the 2.4ghz cordless phone?? It says very strong or good but wil only hold for like 5 seconds and disconnect….
I am on channel 11…should I try 1 and 6 or try to change the 2.4ghz phone channel???
Re:Do not worry.:cool:
It just using the same word.
When Kerio talks Gateway it is Not the same as Wireless Gatetway mode. You do not need Kerio Gateway since you have a Router.
Do not use the newest release of Kerio Free, the one that can be upgraded to full, they put on it a nice interface on it, but it "Sux".:thumbsdown:
The old Kerio v215 is much better: Kerio v215. (http://www.kerio.com/new/kpf_download.html):thumbsup:
And there is a Very Big Point in having software firewall, and more, even if you do have a Router.:shocked:
Why?
Link to: Basic Protection for Broadband Internet Installation. (http://www.ezlan.net/firewall.html)
Link to: Internet infestation -Or, how you are getting Internet "Junk" in and compromise your Computer/Network? (http://www.ezlan.net/infestation.html)
Link to: Basic Steps in cleaning Internet "Junk". (http://www.ezlan.net/clean.html)
:sun:
Re:if you have a router then there's no point in having a software firewall.
Re:good links…I am reading…
The first thing that keeps coming up is wireless router/broadband like mine come with obvioulsy one mode…"gateway"….Kerio says I cant enable gateway mode without full paid for version…I am going to disable and run with the windows firewall and seeif that works…
Re:May be this can Help.
Link to: Wireless – Basic Configuration. (http://www.ezlan.net/Wireless_Config.html)
Link to: Wireless Security. (http://www.ezlan.net/Wireless_Security.html)
:sun:
Re:Will the Kerio freeware firewall be hosing me and maybe I need to clikc something on or off/?? The have this gateway thing and says it should be enabled for wireless but only comes with the paid version….I own Zone alarm suite…maybe I will need to reset that up….I removed that cause I was having some gaming issues with it….I got rid of it and never had the issue again…Also happened on my sons PC until I got it off of it as well…
Re:I tried both with the router…I tried phrase generated and once were I came up with the code key myself….
I have been typing in the key when trying to connect to it….
I aven't tried it without key though….
I have a nvidia network controller and a realtek controller on my board… I have been using the realtek…does that matter!!! When I used the nvidia one it seems to not connect to the net with my main pc…
Re:Try running yours without any encryption and see if you can connect to it. When you type in a phrase for wep, it generates a key based on that phrase. Are you entering the key or the phrase on your machine?
0 Comments.