Q: I work at a small office where we are trying to network two computers together with a DSL line. I went out and bought the Netgear router rt314. A computer is a laptop with Windows 2000 and computer B is a desktop with Windows 2000 and. Heres the problem. I hooked the router to both computers. both computers have Internet access, which works great. A computer can see computer B If I were in my network, but computer B can not computer A. monitor the router itself in the port A computer is connected to the local LED acct is not at all. The computer port B is connected to the local acct LED lights and green. I figure the cables are ok, because both computers on the Internet can use, but after searching NETGEARs site and I can not find, nor can I think of a solution to this problem, so Im turning to you for help. let me know if more information is needed and I will take care of. Thanks to anyone who can help. We are obviously in a very non-computer related issues, so the firm is counting on me to do. thanks again.
Next Generation Network Marketing Handbook
Re:Hooray for the FM procsess.:D
Home Automation & Networking eBook
Re:well i don't know what happened but in the middle of today the phreaking light comes on and all is fine. i'm not sure what i changed. maybe when i kicked it it got scared and started working. thanks again to all those that helped me
Social Network Marketing 2.0 – 75% commission
Re:are you sure that work group on both comps are the same? and if the light is not coming on check cable again and try a different port on the router.
Pmp Exam Questions | Exam Central
Re:Have you tried pinging? PM me if you are unshure how.
52 Model Questions For Bible Teachers.
Re:the other thing i forgot to mention is that when i go to the 192.168.0.1 router page from the computer that isn't working it gives me an unautorized user page. i'm not sure if these two problems are related or separate. thanks again for everyone who has helped.
The Social Networking Business Plan
Re:i've got client for ms networks/file and printer sharing and tcp/ip enabled and no luck i will double check to make sure i haven't missed anything. and the computer that can't see the other can see itself. thanks so much for the responses i'll let y'all know how it goes
Network For Success Business Building Intensive (online
Re:2 Win2k machines can do a peer2peer workgroup. u have to have them set "shared". are all the protocols loaded on both machines???
50 Home Business Clarity Questions
Re:try pinging the ip addresses to see it they are communicating
Cfa Study Notes, Practice Questions
Re:i am not saying that is the answer… but it is a possibility…
good luck
Josh
Gold Standard Trivia Pub Quiz Questions and Answers
Re:file/print sharing must be enabled on a computer for it to be seen on the network… the one that cannot be seen probably can't see itself either… if that is the case you have to go in and add the MS file/print sharing protocols
Josh
Re:This is a common situation that occurs a lot of time. When using Hardware Router, each computer can use the Internet independently, but you don?t really have a network, and in most cases, it has nothing to do with the Hardware. My suggestion, forget about the Internet for few hours, actually disconnect your WAN input, and go over all the setting (especially over the sharing, and user accounts, etc.) and make sure that you have a Network. Once you have a Network connect back the WAN, and have a good time.
If ypu need some pointers log here, and look for Win2000 parts.
http://www.lfchosting.com/helmig/j_helmig/guide.htm
0 Comments.