Q: How does the drive show in device manager? Mine shows as:
IBM-DTLA-307030
Firmware Review: TX40
I only ask cuz preformance test when I run 3.3, I get what I think, fairly lack luster performance.
Disk – be sequential write: 20.2 mb/sec
Disk – Sequential read: 15.4
Disk – Random Seek + RW: 0.87
Disk Mark: 96.4 Composite Average
Here is my current configuration: 700 @
Duron 900
ASUS A7V
128 meg PC133
TNT2 Ultra
ASUS S500 50x
Do that number seem right? Is the model number for the correct device manager? Let me know what you display. Thanks!
Re:I was just reading the reply about DMA and I double checked the settings, and DMA isn't an option on it. So I don't know what the deal is!
Re:I have the same, DTLA 307030 Scsi device. I have mine on the promise controller thats the reason for scsi. I can't seem to find firmware revision using 2000.
Re:yes. and i've installed the latest promise drivers off of the asus web site. i don't know why it's going to slow!!
Re:Do you have DMA enabled?
Re:I have 2 on a KT7 non-RAID, they show up as Generic IDE Disk Type 47 and Generic IDE Disk Type 80 respectively. I get 27+MBytes/sec on benchmarks.
Re:Got 2 in a raid0 array, but the mobo is actually down so canot cach.
Anyway, what controller is it hooked up to? And do you have the latest DMA driver?
0 Comments.