Posted by admin on June 28, 2011
Q: I want to RAM sinks on a video card. I have some Arctic Silver epoxy, but Im not sure if I would go with this permanent solution. The permanence of it does not concern me as much as the long-term efficacy.
It seems counterintuitive to me that epoxy would be a better interface than thermal adhesive thermal tape. Should I go with the Arctic Silver Epoxy or stick with the thermal adhesive tape that comes pre-applied to the RAM sinks?
Posted by admin on June 28, 2011
Q: How do you go about resetting the Cisco Aironet 350 Series Access Point? All documents on the site only say how to do this with firmware versions 11.07 and up, the boot version 1.06 and above. The Access Point firmware is 11.21 (I think), and the boot version 1.09. I know its a shot in the dark, but if anyone can help, or know where I can get help would be greatly appreciated.
Posted by admin on June 23, 2011
Q: Hey everyone, I have a strange problem. After installing the drivers from 4.28, My IBM hard drive or CDROM Acer are now recognized as SCSI devices. Is this a problem? Everything seems to work great. If anyone has any information if it would be appreciated. Thanks a lot
Posted by admin on June 23, 2011
Q: I use Outlook 9 . and I get tons of emails every day . for some reason . I can only a certain number of emails in my account . when new emails arrive. . replaces the old .
i really need to get all e-mails . HELP HELP I keep
HELP pls
mod pls give this thread 5 misn before you move . pls .
this reallu is urgent for my work
Posted by admin on June 22, 2011
Q: I am looking for the cheapest way to access my desktop to my WiFi network (instead of an Ethernet cable that runs through half of my apartment). I want fully supported by Linux, but (I think it forces me to search for Atheros-based hardware or PrismGT)
Any suggestions?
Posted by admin on June 22, 2011
Q: So I was pwning (http://pics.bbzzdd.com/users/guy/Shot00027.jpg) tonight at 2004 UT when I wot to do . one came on the UMGLeague Torlan Onslaut Server and knew I was from here . Who was it?
Posted by admin on June 22, 2011
Q :11-164-059 CASE WORLD LINK | 3230-02C2222U W / WNDW 1
13-123-230 MB | Epox EP-9NDA3J nForce3 ULTRA RT 1
14-130-220 VGA EVGA | GF 6600GT 128-A8-N350 1
19-103-534 CPU AMD 64 | AMD Athlon 64 3200 + 939P% 1
20-145-440 DDR CRSR 512MB X2 KIT | VS1GBKIT400 1
21-103-116 FD 1.44MB | Sony MPF920 Black% 1
22-144-152 HD 160GB | WD 7200 8MB WD1600JD% 197 750 327 – 140-117 AOPEN DVDRW | DUW1616ARR PA 1
35-118-112% CPU FAN A / RT IZALMAN CNPS7000B-ALCU 1
t
Posted by admin on June 22, 2011
Q: Just wondering . I was just on my 180-Raid KR7A XMS2700 with XP1600 + and a new AGOIA
Posted by admin on June 22, 2011
Q: Just about every day my modem router and two or three times to break. I have made the router settings, changed the channel of the wireless connection (my router automatically connects to a channel that the least amount of people (there are only two people in the area with wireless internet, both on diff channels). I dont know what else to do. had, I have another router, and I use a good Now I believe, faith is the model number Buffalo HP G54-i. I thought maybe my Cox modem. They have come out
Posted by admin on June 22, 2011
Q: I recently tried to install Mandrake 9.1 on my HP. The computer froze during installation. When I try to boot, try loading the OS, but fails. I would try a fresh install of Mandrake, but I do not know how. I have the installation CD in the drive, but the computer still tries to boot from the HD. Im not sure how to access bios on this comp, as the HP. Booting from CD for good, because Im (kinda) Mandrake install it.
Help please!
Thanks for any ideas you can give me! Ask for mo