Posted by admin on August 1, 2011
Q: If you try to install Windows 2000 pro with boot disks and CD-ROM, I get an error message as follows: u0026quot; Disk I / O error: Status = 00008001 u0026quot, and also get this message: u0026quot; Failed to arc read the boot partition to check for a signature u0026quot;. Either message means nothing to me . does to anyone there? . Need help as soon as possible thanks .
Posted by admin on August 1, 2011
Q: The cheese-dicks over at Sharky decide what they are running title u0026quot, Sharkys High End 3D graphics u0026quot Shootout;. They choose about 6 cards based on the GeForce 2 GTS chipset (um. . one or two guys would have sufficed?) A V5 5500, and the budget Radeon. Now since this is supposed to be a High End u0026quot; u0026quot, video review, what possible reason would these idiots do not find a 64Mb Radeon with 183/183 MHz clocks are?
Im tired of reading such biased nonsense .
Posted by admin on August 1, 2011
Q: small network with 8 computers connected to a Linksys BEFSR41 router with an 8-port hub. I am running Windows XP. Anyway network traffic and bandwidth usage monitoring internet through XP? If not what is a good easy to use app to do this? Any ideas?
thanks Drew
Posted by admin on August 1, 2011
Q: I try to boot to DOS FDISK, so I can see my hard drive but can not seem to boot from floppy, even though it is set to boot from A, C, SCSI.
I m running Mandrake 9.1 to get. It simply means the Linux boot loader.
I get this: Error: 0×40
The above problem is now solved, but I can not get rid of this conflict IDE I got after loading the default settings in my boot BIOS.
I can now load Windows, but I have to keep F1 bypass this error message from expressing
Posted by admin on August 1, 2011
Re:ok, I'm using Cold Fusion & when I attach the file, it doesn't do anything but attach the file (ie. doesn't use it as the background) – & absolute URL hasn't worked. I'll try moving that attribute to the <table> tag I guess.
Re:OK, I've tried using an absolute URL & it didn't work, but [...]
Posted by admin on August 1, 2011
Q: I have a fresh install of win98se with an old network. Do you have drivers on the hard disk installed fine. Principal, NIC, and protocol are all installed what appears to be correct. I can not get a software connection to the router. I get a 169.254.xx address instead of 192.168.1.x as I should. The light on the router and I have sinc port2 lit by the lights on the back of the NIC.
: confused:
Ive again the NIC in the Device Mangler
Ive again the NIC in the network
Posted by admin on August 1, 2011
Q: The last week or two dual-core Opteron everyone recommend to people, why? Whats the big difference between this and the X2? Why has it only been recently recommended its dual core Opterons new or somthing?
Posted by admin on August 1, 2011
Q: I have the Linksys BEFW11S4 for $ 75 and $ 50 for the Netgear MR814.
The better buy (feature wise) is? Perhaps a better wireless router in this price range? Comment away!
Thanks in advance guys. -Guy
Posted by admin on August 1, 2011
Q: I have a 256 meg stick of RAM in Linux PC. BIOS detects the sound when the computer posts.
According beyond says
Mem: 64044k av, 62 388, used, 1656k free, meg 97,750,397,750,364? Why is not entirely out to see?
dave
Posted by admin on August 1, 2011
Q: I am facing a strange error with lines written as such: $
uint8_t potm potSetting;
where uint8_t is typedefed above, provides the following errors
/tmp/cc0twSga.s: 134: Error: expected comma after symbol-name
/tmp / cc0twSga.s: 134: error: unknown opcode “potsetting
If I remove the $ and everything for him, in this case $ potm, leaving only uint8_t potSetting, the error goes away. So is the $ character in the special variable names ?