Q: I can not fromat disks, even after a clean install of 98SE. What I found was if I did not load the driver ndis2sup.vxd I could. What does this file do? Do I need it? Everything seems to work if I did not load.
Live In A World With No Problems.
Re:Yeah, you wanna talk about tearing my hair out. Geesh.
End Your Sinus Problems the Natural Way: Forget the Harsh Drugs
Re:If i ever hear of a stranger problem i'll let you know.
Who knew. Modem interfering with a floppy like that.
Anyway, good to here it's fixed.
Solutions To Your Cat Behavior Problems By 2 Cat Vets
Re:Well, I had already tried everything you guys suggested. Here's what the problem was. It was my modem. It is an ISA hardware 56K pnp. It was causing the problem when it was set to plug and play. On one of my numerous reboots, it lost the modem and 98 wanted to install the drivers for it. I didn't and I was able to format. When I loaded the modem drivers, I couldn't format. I removed the modem completely and could format again. Reinstalled the modem and the drivers, couldn't format. So I set the modem's IRQ and Com and reinstalled. I happy to report that everything is working OK. Thanks for the responses.
Cure Tight Foreskin Problems
Re:ndis2sup.vxd – this file is used for by your nic card.
Your format problem sounds like you have the floppy disk copy protected. Make sure the tab is set to close and you should be able to format. Let me know if this works.
Out of Order, The problems with men
Re:did you check to make sure the floppy works in another machine? sometimes floppies can give strange errors.
EBook(R) Problem Solver.
Re:Can you format a floppy in DOS?
0 Comments.