When I try to connect to me correct to ask for a key and I type it in when I set it up and NO GO! It does not mean that it is wrong it just never connects .

I have a WRT54G v2.2 router and a Linksys WMP54G PCI Adapter . well .

I set up the wirelss router on my main machine and followed their simple step by step setup . It seems since the work via the cable modem is working properly .

I tried to set it to mixed B and G, but the levy thing before I save settings will only say B . Im not sure you POS! So I finally just set my G-only and said, forget the laptop and the B-mode adapter . By the way I was never that, at work and it was 2 feet away . It stayed connected as a peer to peer, but woulnt let me use the internet .

It cannot be away for my neighbors to their lowest floor and away . So I should work .

Any guides to help me set this up? ?

It see but I can not access it. The first time I could open and said a strong signal, but I coulnt the net . Now its simply not even connect . but says not connected and their networks are available . Like I said, I chose my neighbors and it works as I type this .

Next thing I know the laptop had no connection and the LAN connect line said limited or no connectivity…I try to reinitialize router and it errors out saying the router failed to assign an IP…I tried repair no go…I tried disconnecting the cable modem so it would reset the mac id and no go…Only way I could get internet to work was put the modem line back directly into the pC and forgo the router…

WTH…Are networks this unstable???

I though it was th ecordless but it was saying 68% signal strength which must be prety good for wireless….I had one 80xx auth checked and once I unchecked it the signal hols….

Now I want to enable the WEP….

Will I be safe behind the windws firewall and if it is the only PC with it installed??? I set up the network so the diagram said all pc go to hub then main pc before internet….Is this right???

It works…I setit back to mixed mode though the f-ing program say B mode only and the laptop works flwalessly….

Upstairs works but wont hold signal lock….Is it the 2.4ghz cordless phone?? It says very strong or good but wil only hold for like 5 seconds and disconnect….

I am on channel 11…should I try 1 and 6 or try to change the 2.4ghz phone channel???

It just using the same word.

When Kerio talks Gateway it is Not the same as Wireless Gatetway mode. You do not need Kerio Gateway since you have a Router.

Do not use the newest release of Kerio Free, the one that can be upgraded to full, they put on it a nice interface on it, but it "Sux".:thumbsdown:

The old Kerio v215 is much better: Kerio v215. (http://www.kerio.com/new/kpf_download.html):thumbsup:

And there is a Very Big Point in having software firewall, and more, even if you do have a Router.:shocked:

Why?

Link to: Basic Protection for Broadband Internet Installation. (http://www.ezlan.net/firewall.html)

Link to: Internet infestation -Or, how you are getting Internet "Junk" in and compromise your Computer/Network? (http://www.ezlan.net/infestation.html)

Link to: Basic Steps in cleaning Internet "Junk". (http://www.ezlan.net/clean.html)

:sun:

The first thing that keeps coming up is wireless router/broadband like mine come with obvioulsy one mode…"gateway"….Kerio says I cant enable gateway mode without full paid for version…I am going to disable and run with the windows firewall and seeif that works…

Link to: Wireless – Basic Configuration. (http://www.ezlan.net/Wireless_Config.html)

Link to: Wireless Security. (http://www.ezlan.net/Wireless_Security.html)

:sun:

I have been typing in the key when trying to connect to it….

I aven't tried it without key though….

I have a nvidia network controller and a realtek controller on my board… I have been using the realtek…does that matter!!! When I used the nvidia one it seems to not connect to the net with my main pc…

Related posts

• Compatible Wireless Desktop Adapter [compatible desktop] [wireless adapter] (0)

Does also need to Buffalo, or would it simply be 802.11g compatible with another brand? If any brand will work, anyone a suggestion for a reliable adapter?

Thanks

For Recomendations – Personally I like Linksys and never had any problems with them. Works pretty fast for me. NetGear also has lots of fans

I'm Linksys shy right now. I have had trouble with them in the past, so I think I am going to try D-Link or Buffalo this go around and see if I get any better results, but I appreciate the feedback.

Buffalo Card would do the 125Mb/sec. Mode, http://www.newegg.com/Product/Product.asp?Item=N82E16833162112

Buffalo High Power Card with the High Power Router is the Best, http://www.newegg.com/Product/Product.asp?Item=N82E16833162128

I need a Wireless Desktop Adapter, the notebook adapters won't help me, but I'll do some surfing and see if I can find a Buffalo HP desktop adapter. Thanks for the feedback.

Buffalo Card would do the 125Mb/sec. Mode, http://www.newegg.com/Product/Product.asp?Item=N82E16833162112

Buffalo High Power Card with the High Power Router is the Best, http://www.newegg.com/Product/Product.asp?Item=N82E16833162128

For Recomendations – Personally I like Linksys and never had any problems with them. Works pretty fast for me. NetGear also has lots of fans

Related posts

• I need help! cannot seem to set up a wireless network right [wmp54g] [wireless adapter] (0)