Q: I have just a USB 2.0 kit and the installation of the HD. I get this damn error every time I try to connect to my computer. The Damned is powered external case. I tried it on my ABIT Nf7 and my Dell 8600. Both are running WinXP Pro w / SP2.
Any suggestions on what to do?
PappaPC Computer Home Business – $100 Per Hour!
Re:Originally posted by: guy
WORKAROUND
To work around this issue, you must power the USB device by an external power source if one is available for the device. For example, you may be able to use an AC adapter to power the USB device.
Did you read this carefully? I don't see how this applies to your situation. The problem MS is describing is only with devices that are not powered.
I don't think installing SP1 will help. All it will do is supress the error message, but you may still be drawing too much current from the USB port is the USB enclosure is defective.
i think its an SP2 issue… my friend bought the same enclosure and im using it and getting the same errors 
Sell Android Themes
Re:WORKAROUND
To work around this issue, you must power the USB device by an external power source if one is available for the device. For example, you may be able to use an AC adapter to power the USB device.
Did you read this carefully? I don't see how this applies to your situation. The problem MS is describing is only with devices that are not powered.
I don't think installing SP1 will help. All it will do is supress the error message, but you may still be drawing too much current from the USB port is the USB enclosure is defective.
Online Poker Code Crack
Re:damned microsoft….
http://support.microsoft.com/default.as…d=kb;en-us;870893&Product=windowsxpsp2 (http://support.microsoft.com/default.aspx?scid=kb;en-us;870893&Product=windowsxpsp2)
currently formatting my drive on my SP1 computer….. my sp2 computer still wont work
Learn How To Meditate Daily
Re:i just plugged it into my backup computers USB port and I have no problems. My backup computer is running windows xp but with SP1.
eBay® – Inside Out How I made $1,200,000 In 8 Months
Re:i powered off my hub then turned it back on and it temporarily worked. then it failed in the middle of the format of one of the partitions. now im getting the same damn surge errors…. very frustrating.
Wholesale Sources.
Re:all of my hubs are powered. The hard drive is powered. I have turned off all warning messages and it still doesnt work!
ive disabled all error messages and it doesnt work. it doesnt work when I plug it into my mobo or a hub.
and it happens on both computers
edit: I have the koutech USB case that was in hot deals a couple of days ago. its model# is eeu325
Stock Picks System
Re:What brand\model USB case kit is it?
The USB bus can only deliver 500mA (+5V).
Some lower quality kits use VIA, PC Chips, & ALi chipsets which
are probmatic with low power levels.
A powered hub would eliminate the problem but should not be required.
Mafia Wars Annihilation – The #1 Mafia Wars Strategy Guide
Re:You didn't elaborate. Is this happening on both computers or only one?
If it's happening on both then I would suspect there's a problem with the external drive enclosure. It may be drawing power from the USB bus even though it shouldn't.
If it only happens on the one computer, then maybe the USB 2.0 card you bought is defective.
Are you pluging straight into the USB port or are you going through a hub? You should always try to connect a HDD direct to the port.
0 Comments.