Q: Hi,
Im thinking about experimenting with a wireless network at work and I had a few questions (are sanctioned by the company, so it is not an unauthorized network addition). Firstly, I have a fairly well developed network in the office (incoming T1 router, switched network, fiber, etc.), and was wondering what type of device I should also have wireless access. Some think it is as a router is needed (for example see this (product # http://www.buy.com/retail/product.asp?sku=10326046u0026loc=10996u0026PageFormat=4)) or is there no easier / cheaper way to to continue as an access point? I was not sure if two routers together were even allowed on the same network. Any suggestions would be great.
Thanks
Re:The Content of the Following Link Might Help:
How do I use a Wireless Cable/DSL Router as a Switch with an Access Point? (http://www.ezlan.net/router_AP.html)
Re:It puzzles me that wireless routers are actually cheaper than standalone wireless access points. Is it because of the added features in standalone APs (e.g. can be configured in Client or point to point bridge mode?) Or does it just have something to do with marketing, e.g. wireless routers are more in demand so they can be sold cheaper?
Re:Disable DHCP and don't use the wan port of a Router/Ap combo unit. You have an AP. In most circumstances the combo units are only marginally less expensive than AP's from the same company but if your trying to save 10 bucks, then a combo can definitely be used as a straight AP.
Re:it seems like the wireless routers are cheaper than the access points. is it possible to use a wireless router simply as an access point to save money?
edit: I just read the other link that you provided. Is the reason i need the access point because wireless routers only usually act as a gateway? do you know of any cheaper access points or wireless routers that will work for a network that already has routing?
Re:If your system is providing Routing to any computer that is plugged into the system, you do not need a Wireless Cable/DSL Router (that is the device in your link).
You need to get an Access Point, and plug it to one of switches on your office LAN.
Example:
900AP+ Wireless 22Mbps Access Point Enhanced Wireless Access Point. (http://www.buy.com/retail/product.asp?loc=101&sku=10326211)
More about Access Points here:
Wireless Network – Configuration Modes. (http://www.ezlan.net/Wireless_Modes.html)
0 Comments.